Flooring Products
DX-1100 Deep Penetrating Primer & Sealant for Concrete
DX-1100 is a 100% solids, low viscosity primer designed for sealing concrete. It’s slow cure rate and hybrid novolac chemistry allow DX-1100 to deeply penetrate surfaces, which greatly enhances the long term performance of coatings and sealants. DX-1100 is especially recommended for concrete applications as it helps eliminate outgassing and bubbles. DX-1100 can be applied to green concrete as young as seven days based on ASTM F1869-10 with a moisture vapor emission of 10 lbs or less per 1,000 square foot area in a 24 hour cycle. .
Product Data
Part A SDS
Part B SDS
DX-4400 Ultra Clear Coating and Sealant
DX-4400 is a high grade, 100% solids, novolac epoxy with UV protection additives that offer long term non-yellowing protection with non-blushing and non-chalking properties. DX-4400 is used for boat building, fiberglass fabricating, wood working, bar top finishing, restoring piers and decks and many other applications. DX-4400 forms a polished, highly durable, wear resistant surface and is unaffected by saltwater, fuel, oil, and mild acids while exhibiting long term corrosion proof and chemical resistance protection.
Product Data
SDS
DX-2000 High Strength Immersion Coating
DX-2000W is 100% solids, contains no volatile organic compounds or solvents so it may is safe to apply confined areas with good ventilation. Dynesic’s DX-2000W has been the leader in hybrid novolac coating technology and is well known for lining ductile pipe used in sewage gathering systems. DX-2000W meets the performance requirements of AWWA C210 and FDA requirement 21 CFR 175.300 for food contact.
Product Data
Part A SDS
Part B SDS
PANSEAL PASTE-GRADE Trowellable Surface Repair
PANSEAL PASTE-GRADE is a unique, multi-component, novalac epoxy designed to quickly seal and repair leaking and corroded surfaces, forming a new, non-rusting and permanently restored surface. Typical applications include wastewater (tanks, lift stations, wet wells, and manholes), cooling towers, and more. PANSEAL PASTE-GRADE is ideal for majorly damaged surfaces and vertical applications because it has a thick viscosity and can be applied with a trowel.
Product Data
Part A SDS
Part B SDS
Product Video
