Concrete Repair

DX-1100 Deep Penetrating Primer & Sealant for Concrete

DX-1100 is a 100% solids, low viscosity primer designed for sealing concrete.  It’s slow cure rate and hybrid novolac chemistry allow DX-1100 to deeply penetrate surfaces, which greatly enhances the long term performance of coatings and sealants.  DX-1100 is especially recommended for concrete  applications as it helps eliminate outgassing and bubbles.  DX-1100 can be applied to green concrete as young as seven days based on ASTM F1869-10 with a moisture vapor emission of 10 lbs or less per 1,000 square foot area in a 24 hour cycle. . 

Product Data

Part A SDS

Part B SDS

PANSEAL Cooling Tower Sealant and Coating

PANSEAL is a unique, 100% solids,  multi-component epoxy designed to quickly seal and repair leaking and corroded surfaces, forming a new, non-rusting and permanently restored surface.  PANSEAL is used worldwide in the HVAC industry to coat, repair and protect cooling towers, chillers and walk in refrigerator rooms.  PANSEAL contains no VOC’s.  and it's excellent adhesion properties allow PANSEAL to bond to steel, concrete and iron even when coating conditions are less than ideal.  

Product Data

Part A SDS

Part B SDS

PANSEAL PASTE-GRADE Trowellable Surface Repair

PANSEAL PASTE-GRADE is a unique, multi-component, novalac epoxy designed to quickly seal and repair leaking and corroded surfaces, forming a new, non-rusting and permanently restored surface.   Typical applications include wastewater (tanks, lift stations, wet wells, and manholes), cooling towers, and more. PANSEAL PASTE-GRADE is ideal for majorly damaged surfaces and vertical applications because it has a thick viscosity and can be applied with a trowel.

Product Data

Part A SDS

Part B SDS

DX-3300 Ultra Chemical Resistance Sealant & Coating

DX-3300 is a 100% solids, spray-able, industrial strength. long term protection system designed for metal and concrete substrates.  DX-3300’s high cross-link density protects surfaces with ultimate chemical resistance within the aggressive environments of the petroleum industry.  The solids content and morphology make DX-3300 an excellent tank, vessel, pipe & spool internal lining system, that withstands high heat and abrasive conditions. 

Product Data

Part A SDS

Part B SDS

Product Presentation

REZCRETE 3D Permanently Repairs Damaged Concrete and Stonework

REZCRETE 3D is a unique, 3 component, 100 % solids epoxy with a polymer-quartz-aggregate designed to adhere to concrete, stonework and many other surfaces. REZCRETE 3D is moldable and formable by hand and sets up much harder than concrete. REZCRETE 3D is widely used to repair curbs, cinder blocks, stucco, columns and a variety of other applications. Once cured, REZCRETE 3D can be machined, sanded and painted.

Product Data

Part A SDS

Part B SDS

ELASTASEAL Elastomeric Coating & Sealant

is a high grade, 100% solids, two part elastomeric epoxy designed for applications requiring high elongation.  ELASTASEAL is UV stable, flexible (adjusting from freeze to thaw), withstands moisture, temperature changes and mildly acidic or alkaline environments.   ELASTASEAL provides excellent protection for expansion joints, cracks in concrete, heaving soils and surfaces that expands and contracts.

 

Product Data

Part A SDS

Part B SDS